The correct use of the automatic feeding mixer is conducive to the smooth construction, and can improve the efficiency of the project. If it is not used correctly, it will damage the mechanical parts of the equipment, thus reducing its service life. It is important to operate in strict accordance with the instructions when using. Generally, if the temperature of the automatic feeding mixer is too high in summer, it should stop working immediately and continue to use after the temperature drops. Today, let's briefly introduce the correct use of the automatic feeding mixer.
1、 The standby radiator environment should be ventilated and dry. It shall not contact with any acid, alkali or other corrosive substances.
2、 It is recommended that soft and hard water should be softened before use to avoid blockage and scale inside the radiator.
3、 In winter, in order to prevent core fracture caused by ice formation, if the mixer truck is stopped for a long time or indirectly, the water tank cover and drain switch shall be used to drain all water.
4、 The water level gauge shall be cleaned every 3 months or as the case may be, each component shall be removed and cleaned with warm water and non corrosive detergent.
5、 When the radiator is completely drained and refilled, turn on the water drain switch of the engine block first, and then turn it off when there is water flowing out, so as to avoid water bubbles.
6、 Check the water level at any time during daily use, and add water after shutdown for cooling. When adding water, slowly open the water tank cover, and keep the operators away from the water inlet as far as possible to prevent scalding caused by the spray of high-pressure gasoline.
The above is about the use of the radiator of the mixer. The correct operation mode can greatly improve the use effect of the radiator of the automatic feeding mixer, and can also prevent equipment damage caused by non operation during use. I hope everyone can follow the relevant knowledge and use the equipment reasonably. For more information about mixer truck, please pay attention to this website.
The above is a detailed introduction to the Zhongke self feeding mixer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.mgm6330.com